JingleTel TE110P Asterisk card, low profile PCI, E1/T1/J1 card, support PRI,SS7(libss7 / chan_ss7),

is_customized:

Yes

Type:

VoIP Adapter

Brand Name:

JingleTel

Model Number:

TE110P

E1/T1/J1:

Sigle Span (1 port)

Warranty:

3 years

Place of Origin:

China (Mainland)

Product Description You can do IP-PBX, we can help.Product Spotlightte110P is the worldwide affordable single port T1/E1/J1 card and delivers the great voice quality over telephony systems. It supports up to 30 voice calls or 2.048 Mbps of full duplex data throughput over one T1, E1, or J1 line.

• One T1/E1/J1 port with PCI interface for high performance voice and data applications
• Up to 30 Simultaneous voice calls
• 30-days “No Questions Asked” Return Policy

OverviewThe TE110P supports E1, T1 and J1 environments. It is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipments and allows inexpensive T1 channel banks to connect with E1 circuits. TE110P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported. TE110P works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications. Target Applications

• Voice-over Internet Protocol (VoIP) Services
• Complex IVR Trees
• "Meet-Me" Bridge Conferencing
• Calling Card Platforms
• VoIP Gateways (support SIP, H.323, and IAX)
• Legacy PBX/IVR Services
• Voice/Data Router (replace expensive routers)
• PRI/Switch Compatibility - Network or CPE

Technical Specifications

• One T1/E1/J1 port with PCI interface for high performance voice and data applications
• Half-length PRI card
• RJ48 connector
• 32 bit 33MHz PCI and fully PCI 2.3 compliant
• 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
• Autosense compatibility with 5 V and 3.3 V PCI busses
• Power: 2.6W Minimum, 3.9W Maximum at 3.3 V or 5 V.
• Operation temperature: 0°C to 50°C
• Storage temperature: -65°C to 125°C
• Dimension: 13cm*10.3cm*1.8cm
• Weight: 75g

PRI Switch Compatibility

• EuroISDN (PRI or PRA) - Q.931/Q.921
• Network or CPE
• AT&T 4ESS
• National ISDN 2
• CAS Voice Modes
• DMS 100
• Lucent 5E

Operating Systems

• Linux (all versions, releases and distributions from 1.0 up)

Minimum Hardware Requirement

• 800-Mhz Pentium III
• 128MB RAM
• Available PCI Slot

RoHS compliant
Certificates: CE and FCC
Three Year Warranty!   We can help you to setup asterisk IP-PBX and other applications such as IVR, IVVR,Call center, calling card, ISR, Trunk Gateway . We are familar with  libss7 and chan_ss7 , we have setup 100+ SS7 point in India, Bangladesh,TaiWan, China.  We have more than 10000+ lines IVR and IVVR dialplan code experience , can help you to custom unique interactive flow and voice system solutions.