Click to view original
Prompt message
- Brand Name:
- Voip Gateway Linksys PAP2T
- Model Number:
- Voip Gateway Linksys PAP2T
- Place of Origin:
- China (Mainland)
- Exquisite design small size, easy to carry. the best choice of travel
- More advanced version than PAP2.Unlocked version of PAP2T.Work with any VOIP service.
- The Linksys PAP2T-NA Internet Phone Adapter enables high-quality feature-rich VoIP (voice over IP) service through your broadband Internet connection. Just plug it into your home Router or Gateway and use the two standard telephone ports to connect analog phones or use one of the ports for a fax machine. Each phone port operates independently, with separate phone service and phone numbers, like having two telephone lines. You'll get clear reception and a reliable fax connection, even while using the Internet at the same time.
- With the Linksys PAP2T Internet telephony, along with low domestic and international phone rates, an impressive array of special telephone features are available. Choose your preferred free local dialing area code, regardless of where you live. Or add a virtual telephone number in any area code, forwarded to your Internet phone. You can even add a toll-free number. The Linksys Internet Phone Adapter is compatible with these and all of the other special telephone features that are available from your Internet telephony service provider, such as Caller ID, Call Waiting, Voicemail, Call Forwarding, Distinctive Ring, and much more.
- Two voice ports (RJ-11) for analog phones or Fax machines
- Impedance Agnostics - 8 Configurable Settings
- Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
- Caller ID with Name/Number (Multi-national Variants)
- Caller ID Blocking
- Call Forwarding: No answer, Busy, All
- Do Not Disturb
- Call Transfer
- Three-way Conference Calling with Local Mixing
- Message Waiting Indication - Visual and Tone Based
- Call Return
- Call Back on Busy
- Call Blocking with Toll Restriction
- Delayed Disconnect
- Distinctive Ringing - Calling and Called Number
- Off-hook Warning Tone
- Selective/Anonymous Call Rejection
- Hot line and Warm Line Calling
- Speed Dialing of 8 Numbers/Addresses
- Music on Hold
Step 1
connect a RJ45 cable from PAP2 LAN port to your LAN(Local Area Network).
Step2
connet a RJ11 cable from your plain old telephone system phone to PAP2 phone 1 port.
Step3
Connect the power cable to to the PAP2
Step4
Reset PAP2 to factory setting.
Pick up the plain old telephone system phones to PAP2 phone 1 port
Press ****(Press Asterisk key four times)
Press 73738#(You will hear enter 1 to confirm and * to exit)
Press 1(This will confirm the factory reset)
Step 5
Verify your network is DHCP enable or not. If not, please contact your network administrator. By Default most of the Internet Routers/Modem is configured for DHCP.Open your DOS prompt from your windows operating systemlick start menu on your bottom left screenClick runType cmd for windows XP/2000/2003.Type command for windows 95/98HCP is enabled if you are able to renew your computer IP address. This is unsuccessful, please contact your network administrator to enable DHCP or configure your PAP2 2002 with static IP.Please leave your DOS prompt open for step 2. Package Content:
- Brand New
- Unlocked Linksys PAP2T X 1(without stand and box)
- Power Adaptor(100-240V We will ship different version UK,US,AU,EU to different region) X 1
