1.75mm ABS Filament 1kg/2.2lb 3D Printers Reprap, MakerBot Replicator 2, Afinia, Solidoodle 2, Print

Model Number:

1.75mm ABS Filament 1kg/2.2lb

Type:

Other

Color:

RED, BLUE, WHITE, GREEN, BLACK, PURPLE, ORANGE, YELLOW

Suitable for (1):

RepRap, Makerbot, Mendel, Huxley UP,

Suitable for (2):

Printer,WeisTek,Thing-o-matic,Ultimak

Product Description 1.75mm ABS Filament 1kg/2.2lb Available in: RED, BLUE, WHITE, GREEN, BLACK, PURPLE, ORANGE, YELLOW, TRANSPARENT    please indicate which color do you want when you buy    Original 3D Printer ABS Filament has been tested on RepRap, Makerbot, Mendel, Huxley UP, Printer, WeisTek.
ABS is a polymerized styrene comprised of acrylonitrile, butadiene and styrene.
Acrylonitrile and styrene gives ABS rigidity and shiny surface. Polybutadiene gives it toughness and impact strength.
Aside from these qualities, ABS performs a better flowability when melting and resists corrosion and abrasion as well.
These qualities combined make it an ideal material for injection mold and extrusion.
ABS is a recommended material for beginners by RepRap because of the loose temperature requirement during extrusion process.
This material has been tested on RepRap, Makerbot, Mendel, Huxley UP, Printer, WeisTek, Thing-o-matic and Ultimaker.  
Features
Loose temperature requirement
Good flowalibity
Easy to shape
Specifications
Print temperature: ABS Filament 200°C to 250°C,
First layer temperature: 230°C
Print base material: ABS
Diameter: 1.75mm or 3.0mm   --------------   we provides quality PLA and ABS filament with vibrant colors.
This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
The plastic is great quality, and no kinks or breaks. Best choice for perfect printing!


Features
* For common 3D printers such as Reprap,MakerBot,Afinia,Solidoodle 2,Printrbot LC,MakerGear M2 and UP!(Afinia H-Series).
* This SainSmart filament holds exceptionally tight tolerances.
* The diameter stays stable and consistent(between 1.71mm and 1.78mm)
* Widely used in health care, education, toys, building, automobile, electronics, and anime field.
* it loads and unloads perfectly.

Tips:
1. Is your filament tangled? 
Check that the spool is spinning smoothly on the mount. 

2. Is the nozzle clogged? 
Run the Load script from the onboard menus. Observe the plastic as it emerges from the nozzle. Does it drop straight down, or curl up toward the extruder? If it curls back up toward the extruder, the nozzle may be partially clogged. 

3. Having trouble getting the first layer to stick well?
Some adjustments to the nozzle calibration height help.