purple color 3d printer filaments PLA/ABS 1.75mm/3mm 1kg plastic Rubber Consumables Material MakerBo

Type:

Other

color:

purple

size:

1.75/3.00

Product Description

After payment, please leave a message, what color , size and material do you want.

For example: red ABS 3.00mm 1roll.   blue PLA 1.75mm 2rolls

Specifications  3D printer filament of ABS/PLA 
1.75mm,/3.00mm 
15 colors /20 colors
1kg (2.2lb)/spool   Standard Color of ABS Filament and PLA filament:  White, Transparent, Balck, Grey, Red, Bule, Green, Yellow, Purple, Orange, Pink, Brown, Glod,Silvery,Glow in dark; (Total 15 type of color)        ABS Filament and PLA Filament is commonly used in 3D printing, has the following characteristics:
(1) High strength, good toughness;
(2) Density is small, when printing larger volume model lighter, save money;
(3) Cost-effective, can be processed in wide range temperature;
(4) ABS softer than PLA;
(5) Diameter of 3.0/1.75mm, variations + /-0.1mm,roundness +/-0.05mm;
(6) 1 kg /plastic spool packaging, can be automatic feed;
(7) To be applied to a variety of 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc.(8) No  Bubble                     Production Control 1.Productiong quality control of ABS Filament and PLA Filament
 I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.
II.keep each record filament samples sent to customers, build a tracking able document.
III.when the filament put on shelf longer than half a year, we will dry the filament again.  2.Research and developing
we have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .
  Order quantity from factory:
We have 3 to 10 tons in stock each month, about 50-100kg of each kind.So you can get the best factory price here!! All of our products receive a full quality assessment as part of our production process. We run analysis on melt index, strength, elaticity as well as testing impact tolerances. We also have a full research and development department. This group is ready to modify/improve the properties of our standard products to match your company's specific needs.             Packaging of ABS Filament and PLA Filament 
We put each filament /spool on seal PE bag with desiccant , then smaller carton, then out big box
We also have vacuum heated bag to replace of  PE bag, make better avoid moisture.                                All ABS Filament and PLA filaments are 100% virgin material.Flythinking guarantee the ABS Filament and PLA filament quality.