T-1000S SD card led pixel controller,2013 new version Free Shipping

Item Type:

RGB Controler

Button Number:

4

is_customized:

Yes

Brand Name:

Yuens

Warranty:

3

Certification:

CCC,CE,FCC,RoHS

Color:

White

Voltage:

85-265V

Power Source:

AC

Model Number:

T-1000S

Product Description T-1000S System features 1.32~256 Gray level,Support software Gamma correction. 2.Support the rules and special-shaped handle. 3.Single-port output,can support 2048 pixels. 4.Off-line(SD Card) control, play back content stored in the SD card. 5.T-1000S store a maximum of 16 programs,copy multiple files to the SD card in order,       after formatting the SD card as ?FAT? format. 6.The program must be named in orders . just as :00_1.led, 01_1.led, 02_1.led. 7.Compatible with single line or double line chips. NOTE:1. When T-1000S controller control less than 512 lamps the frame rate can reach 30fps. When T-1000S control more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically. T-1000S must use the new software LedEdit 2012. 2.Support chips:   Chip type Software code& Controller type Lamps/(MAX) Note LPD6803,D705,1101,6909, 6912 T-1000-6803 2048 pixels   LPD8806,LPD8809 T-1000-8806 2048 pixels   TM1803,TM1804,TM1809,TM1812 T-1000-TM 2048 pixels TM1804 and TM1809 are divided into high and low TM1903,TM1904,TM1909,TM1912 T-1000-TM19 2048 pixels   UCS6909,UCS6912,UCS7009,UCS5903 T-1000-UCS-32 2048 pixels   UCS1903,UCS1909,UCS1912 T-1000-UCS-256 2048 pixels 1903 and 1909 are divided into high and low UCS3903 T-1000-UCS-1024 2048 pixels   DMX512 T-1000-DMX 170/512 pixels Compatible with standard DMX512 WS2801,WS2803 T-1000-WS 2048 pixels   WS2811 T-1000-WS2811 2048 pixels WS2811 be divided into high and low DS189 T-1000-DS189 2048 pixels   TLS3001,TLS3002,TLS3008 T-1000-TLS * pixels   P9813 T-1000-P9813 2048 pixels   SM16715 T-1000-SM16715 2048 pixels SM16715 be divided into high and low SM16716 T-1000-SM16716 2048 pixels   BS0901,BS0902 T-1000-0901 2048 pixels   BS0815 T-1000-0815 2048 pixels         3.Definition of printing: Buttons Meaning SET Save Settings (to save current settings file and the playback speed) MODE Change programs SPEED+ Speed up Press speed+ and speed- at the same time the program will play circularly. SPEED- Speed down                   DC5V +5V power input GND Power GND input 7.5-24V +7.5~24V power input POWER Power indicator ERROR Error indicator SD CARD SD card slot TTL signal(245/spi signal):               RS485 signal.   CLK Clock signal B Signal A / DMX+ DAT Data signal A Signal B / DMX- GND Signal ground GND Signal ground           NOTE:For the TTL(SPI) signal, the controller signal ground must connect to the LED ground directly. 1.         Multiple T-1000S controllers can be cascaded together and work synchronously. 2.         T-1000S one TTL(SPI) signal and one RS485 signal port output,can control 2048 pixels/lamps; 3.         When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller. 4.         If you need to use RS485 signal you need to connect controller A interface with LED lamps A (DMX+), controller B interface with LED lamps B(DMX-), 5.         If you need to control a new IC type by the controller, software code mode is: T-1000-IC model.     Name of the program:(The rule of how to name the programs:) The name for NO.2 controller: ?00_1.led? --------- NO.1 program for No.1 controller ?01_1.led? --------- NO.2 program for No.1 controller ?02_1.led? --------- NO.3 program for No.1 controller   ?? ?15_1.led? --------- NO.16 program for No.1 controller The name for NO.2 controller: ?00_2.led? --------- NO.1 program for No.2 controller ?01_2.led? --------- NO.2 program for No.2 controller ?02_2.led? --------- NO.3 program for No.2 controller   ?? ?15_2.led? --------- NO.4 program for No.2 controller ???   PIC:   Special parameters     Memory card:           type:SD card(suggest using high-speed SD card)           Capacity:128MB~2GB           Format:FAT           Store file:*.led     Physical parameters:           Working temperature :-30~85 centigrade           Working voltage:DC5V / DC7.5-24V           Working power:1W                     size:L165mmxW80mmxH30mm                     weight:0.35KG                     signal port:3pin connect port Note: Before copy files to SD card ,The SD card must be formatted as FAT format   The SD card in controller can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply    Trouble shooting   Question 1:After power, the T-1000S ERROR indicator has been flashing without display output answer:The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:     a.SD card is empty, with no effect file.     b.The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file *led.     c.SD card did not format to FAT before copy effect files.     d.Please check the supply power voltage, the controller can be individually powered to exclude power reasons     e.Changing the SD card and then test to exclude the possibility of a bad SD card Question 2: The controller is powered on, the indicator is normal, but the lamps have no effect change Answer: The reasons for this are as follows: a. Check if the lighting?s signal line and the controller connected correctly b.    If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lighting?s and the controller?s ground together c.  Check if the model chose during making display files on the SD card match the chips used in the lighting