buy Tungsten Carbide Die Blanks

Polypropylene

Melt flow rate at 230C and loading 2, 16 kg: 3-5

Density at 23C: 898 -905

Tensile strength at flow at 50mm/min not less than: 30

Izod impact with notch at 23C not less than: 25

Deformation temperature at 1820 kPa not less than: 55

Bending moduls 1% secant not less than: 1100

Color: Transparent

Qty: 30 ton monthly

Application: Injection

HDPE

Melt flow Index 190C / 5 kg g/10 min: 2,6 - 3,2

Melt flow Index 5pread within a lot, max: 10

Density at 23C g/cm3: 0.956 - 0.961

Yield strength, min MPa (kg/cm2): 25,5 (260)

Tensile strength min MPa (kg/cm2): 27,4 (280)

Volatile Content max % by wt: 0,035

Ultimate Elongation, min %: 700

ESCR (50C 100% igepal, F 50) hrs: 8

Color: Transparent and White

Application: Blowing

If you can manufacture this products, pls keep contact by me as quickly as possible.