Click to enlarge
Soya bean oil production project (Turn--key project)
| No. | Equipment name | Specification | Qty | Power(KW) | Price(RMB10,000) | Remark | |
| unit price | amount | ||||||
| 1 | Refining pot | LYYG·220 | 2 | 7.5*2 | 3.80 | 7.60 | |
| 2 | Decoloring pot | LYTG·220 | 1 | 7.5 | 4.30 | 4.30 | |
| 3 | nigre pot | LZJ100 | 1 | 1.00 | 1.00 | ||
| 4 | Hot Water Tank | XRS150*200*75 | 1 | 0.30 | 0.30 | ||
| 5 | Alkali liquor tank | XJS150*200*75 | 1 | 0.30 | 0.30 | ||
| 6 | nigre pump | YGF40/2 | 1 | 7.5 | 0.50 | 0.50 | |
| 7 | floridin tank | BT80 | 1 | 0.15 | 0.15 | ||
| 8 | Decoloring oil pump | YTS8/50 | 1 | 7.5 | 0.50 | 0.50 | |
| 9 | Decoloring oil tank | 250X200X250 | 1 | 0.85 | 0.85 | ||
| 10 | vibrating filter | ZDL20 | 1 | 4.50 | 4.50 | stainless filter screen | |
| 11 | cyclone hydraulic separators | FY50 | 1 | 0.25 | 0.25 | ||
| 12 | air compressor | V-0.6/0.9 | 1 | 7.5 | 0.50 | 0.50 | |
| 13 | Deodorization pot | LXTG220 | 1 | 16.80 | 16.80 | stainless | |
| 14 | gear oil pump | 2CY10/4-1 | 1 | 4 | 0.30 | 0.30 | |
| 15 | Polishing filter | DL1.5 | 1 | 0.50 | 0.50 | stainless | |
| 16 | steam generator | ZQG8.4 | 1 | 1.60 | 1.60 | ||
| 17 | Fatty acid capture device | ZBQ80 | 1 | 0.65 | 0.65 | stainless | |
| 18 | liquid and gas seperation equipment | φ325X400 | 0.15 | 0.15 | |||
| 19 | Water vapor jet pump series | QSWJ-230. | 1 | 2.50 | 2.50 | ||
| 20 | Centrifugal pump | IS100-80-160A | 1 | 11 | 0.45 | 0.45 | |
| 21 | Centrifugal pump | IS80-65-160 | 1 | 7.5 | 0.35 | 0.35 | |
| 22 | Water injection vacuum pump | PSWJ-160 | 1 | 0.35 | 0.35 | ||
| 23 | Heat conduction oil furnace | RDL40 | 1 | 5.00 | 5.00 | ||
| 24 | Heat conduction oil pump | RY80-65-200B | 1 | 11 | 0.45 | 0.45 | |
| 25 | Heat conduction oil tank | Φ1200x1500 | 1 | 0.40 | 0.40 | ||
| 26 | Expansion slot | Φ60x75 | 1 | 0.20 | 0.20 | ||
| 27 | Electric cabinet, wire | 1.30 | 1.30 | ||||
| 28 | Installation material | 8.00 | 8.00 | ||||
| 29 | Heat conduction oil | 2.5T | 4.60 | 4.60 | |||
| 30 | Installation adjustment | 0.00 | caculate in addtion | ||||
| Paint heat preservation | 4.80 | ||||||
| 31 | total | 78.5 | 64.35 | ||||
| Note:No.21-24 is not marked on process chart, based on the equipment list , Workshop requirement : width:21 m, length:10 m,height:8 m | |||||||
We provide “Turnkey project” and one-year free after service. We could send technicians to your company to direct the installation and teach your workers to operate the machine.