Verified Company
Xi'an UTOP Measurement Instrument Co., Ltd.
Click to enlarge
UPB1 pressure sensor for air compressor
Description:
Based on piezoresistive silicon technology, UPB1 silicon pressure transmitter uses isolated stainless steel diaphragm as sensing element. This product is fully tested by computer automatically, and trimmed by laser for zero and sensitivity in a wider temperature range. Its amplifier circuit is built in stainless steel housing, to transform sensor signal into standard output signal. This transmitter features integrated construction, rigid and robust, high measuring accuracy, good long term stability, and is suitable for pressure measurement in general industry applications.
This product is widely used for pressure measurement and control of petroleum, chemical-industry, metallurgy, power station and hydrology, etc.
UPB1 G1/2 Process Connecter DIN43650 Electrical Connecter
UPB1 with LCD Display
UPB1 with LED Display
UPB1 DN16 Process connecter
UPB1 Cable (lock nut) Electrical Connection
Features:
*Full stainless steel construction
*Suitable for the measurement of low pressure and vacuum pressure
*Automatic testing, laser trimming compensating zero & sensitivity
*Against thunder stroke, against radio-frequency interference
*Anti-corrosion, anti-attrition, anti-impact
*Reversed-polarity, transient current & voltage protection
Dimensions:
Electrical Connection:
Speifications:
| pressure medium | gas or liquid compatible to stainless steel |
| pressure ranges | -1...0~0.1...1000bar |
| pressure type | gauge (G), absolute (A), sealed gauge (S) |
| overload pressure | 150%FS |
| output signal | 4~20mA, 0~5V, 0~10V, 1~5V, 0.5~4.5V |
| accuracy | 0.1%FS, 0.25%FS (standard), 0.5%FS |
| load resistance | RL = (U-12V)/0.02A (4~20mA current output) U-loop voltage (V) |
| long term stability | <0.2%FS/year |
| supply voltage | 12~36V |
compensated temperature range | 0~70°c |
| operating temperature range | -30~+80°c |
| storage temperature range | -40~+120°c |
| temperature coefficient of zero | 0.2%FS/10°c |
| temperature coefficient of span | 0.2%FS/10°c |
| insulation resistance | 100MΩ@ 50VDC |
| process connection | G1/2 or others |
| electrical connection | DIN 43650 or others |
| material of wetted part | 1Cr18Ni9Ti |
| material of pressure membrane | 316L |
| material of housing | 1Cr18Ni9Ti |
| sealing | n-Butyronitrile or fluoro-rubber sealing ring |
Ordering Code: