wood and Sawdust briquette charcoal making machine
General introduction of wood and Sawdust
briquette charcoal making machine
Producing Process :
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
5. Carbonized the briquette stick
6. Complete charcoal production lines include crusher, drier, charcoal briquette machine, carbonization furnace.
the material can pressed by wood and Sawdust
briquette charcoal making machine
wood and Sawdust briquette charcoal making machine not only suitbale for sawdust,wood ,but also used in sugarcane residue coffee husk Cotton Stalks ,Tobacco waste Mustard Stalk ,
Jute waste Bamboo Dust,Tea waste,Wheat Straw ,Palm husk ,Soybeans husk , Rice Husks ,Forestry wastes ,Wood Chips and many other Agro wastes.But the Moisture Content Should be Less than 12%, grain size is below 5*5mm.
Parameters of wood and Sawdust
briquette charcoal making machine
Model | QW-III | QW-80 |
Power(kw) | 11 | 18.5 |
Electric heater | 1.5kw*3pcs | 2kw*3pcs |
Capacity(kg/h) | 110-160 | 220-320 |
Dimension(m) | 1.7x0.66x1.5 | 1.7x0.8x1.3 |
Raw material Size | ≤5mm | |
Size of finished production | 30-80mm | |
Shape of finished production | Round, quadrangular, hollow hexagonal etc. |
Feature of wood and Sawdust briquette
charcoal making machine
1. raw material moisture within 7-12%.
2.adopting advanced heat flow drying system with excellent drying effect.
3. Through high temperature, with no smoke, no taste and innoxious.
4.with professional technical support and there is no risk.
related picture of wood and Sawdust
briquette charcoal making machine
final products pressed by wood and Sawdust briquette charcoal making machine
Contact information: