Click to enlarge
1.injection molding machine
2.injection weight1770-2240g,spaca between tie-bars800*710mm
3.plastic chair making machine
Specification Table | XY5000 | ||||
A | B | C | |||
Injection Unit | Screw Diameter (mm) | 80 | 85 | 90 | |
Screw L/D Ratio (L/D) | 21.3 | 20 | 19.7 | ||
Shot Size(Theoretical) (cm³) | 1965 | 2218 | 2490 | ||
Injection Weight ( g) | 1770 | 2000 | 2240 | ||
Injection Rate (g/s) | 480 | 508 | 590 | ||
Plasticizing Capacity (g/s) | 65 | 72 | 78 | ||
Injection Pressure (Mpa) | 168 | 149 | 133 | ||
Screw Speed (rpm) | 150 | ||||
Clamping Unit
| Clamping Force (KN) | 5000 | |||
Toggle Stroke ( mm) | 730 | ||||
Space Between Tie-Bars (mm) | 800*710 | ||||
Max.Mould Height (mm) | 720 | ||||
Min. Mould Height (mm) | 350 | ||||
Ejector Stroke (mm) | 170 | ||||
Ejector Tonnage (KN) | 150 | ||||
Other
| Max.Pump Pressure (Mpa) | 16 | |||
Pump Motor Power (KW) | 45 | ||||
Heating Power (KW) | 22 | ||||
Machine Dimensions(LxWxH) (m) | 8.5*2.1*2.7 | ||||
Machine Weight(Approximate ) (t ) | 18 | ||||