Click to enlarge
l 干燥器内的各段湿度可调节，可控制进入出风管的风量，保证各段的湿度在控制范围内，从而保证干燥坯体的质量。
l 占地面积小,只是在高度上有所增加，极大地减少了干燥器的占地面积。
l 节约能源，集中加热，减小了干燥器的体积和外表面积，极大地节约了能源。
l 操作方便，变形小，损坏少，传动的维修很少。
l 快速适应坯体的配方的调节，能够快速地适应各砖坯配方的调整，砖坯损坏率极低。
l 容易清洁，设置了除尘装置，可外接压缩空气进行自动除尘，并且除下的灰尘通过管道(加水)可自动流出干燥器外，除尘作业时可以不停机工作。
Zhongyao Shenzhou ZY7.1 seven layers fast dryer
1. Each section humidity inside the drying kiln is adjustable, the in-out air volume can be controlled, to ensure the humidity of each section in control range, to guarantee the quality of green body.
2. The drying kiln only take a small area, only increase some height, greatly decreased the floor area taken by drying kiln.
3. Save energy and concentrate on heating, by decreasing the volume and surface area of drying kiln, to vastly save energy.
4. Easy to operate, low deformation and damage, very few maintenance on gearing.
5. Rapidly adapt to green body's formulation adjustment, and low damage rate of green body.
6. Easy to clean, and there is dust control unit, can be connected with compressed air to remove dust automatically and uninterruptedly, and the removed dust can flow out of the drying kiln from pipes with water automatically.
中窑神舟ZY788超节能环保零排放辊道窑
产品亮点：
高品质、低能耗、大产量
互联网、工业云、大数据
技术亮点：
l 植入了中窑云控大数据智能管理系统，实时获取设备运行情况；
l 燃气控制和助燃风的控制，采用大型辊道窑上独创双路压力流量控制方式，可大幅度降低能耗；
l 助燃风加热直接采用窑炉急冷的换热，大幅度提高助燃温度；
l 独创新型直冷方式，既提高冷却效果，又减少了直冷段温度的波动；
l 缓冷段增加喷枪的设计，使得冷窑、疏窑时更快实现产量的达标；
l 采用新型弧形面板，色泽上配搭明亮的工业蓝和纯洁的雪山白，整体造型简约流畅，既有传统工业的厚重感，又有现代美学的艺术感。
Zhongyao Shenzhou ZY788 super energy saving environmental protection zero emission roller kiln
Product highlights：
High quality Low energy consumption Large output
Networking Industry cloud Big data
Technical highlights：
1. Use Zhongyao cloud control Big Data intelligent management system, the equipment running status data can be get in real time.
2. Gas control and combustion air control, with original technology of double path pressure and flow control on large roller kiln, energy consumption can be significantly decreased.
3. Combustion air heating directly use the excess heat in rapid cooling section, greatly increased the combustion air temperature.
4. Originally develop the new method of straight cooling, improve the cooling performance, and also reduce the temperature fluctuation in straight cooling section.
5. The spray burner design in slow cooling section, will help reach production output while kiln cooling and dredging.
6. Use new model of curved surface panels, with bright industry blue and pure snow mountain, the whole design is brief and elegant, both with decorous feeling of traditional industry, and aesthetic feeling of modern aesthetics.