Verified Company
Zhengzhou Sutong Electric Equipment Co., Ltd.
Click to enlarge
ST-1200 Laboratory dental equipment:
upward-acting door with Slide Rails High Temperature Furnace consists of high quality alumina fiber brick with special design, and furnace temperature is controlled by high precision resistance wire digital controller with accuracy +/-1 deg oC and 30 segments programmable. It is an ideal tool for materials annealing and sintering in your research laboratory.
Features:
1. Two doors muffle furnace with sliding rails on each door, which makes load samples easy.
2. Operation Temperature: 1100°C ( 1200°C for short time).
3. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.
4. Heavy duty double layer structure with cooling fan. Lower teperature in outside case.
5. PID automatic control via current limiting phase angle fired the resistor, e.g. SCR(Silicon Controlled Rectifier).
Descriptions of dental equipment
Chamber Size (WxHxD) | 250x250x300mm |
Working Temperature | 1100°C (continuous) |
Maximum Temperature | 1200°C |
Temperature Control | 30 steps programmable and PID automatic control |
Heating Rate | 0~15°C/min (suggestion: ≤10°C) |
Temperature Accuracy | +/-1°C |
Heating Element | resistance wire |
Working Voltage | AC 220V, Single Phase, 60/50 Hz (or according to your requirement) |
Max. Power | 4 KW |
Outside Size | 800 x 600 x 840 mm |
Net Weight | 120kg |