Double Layer Steel Roof Panel Roll Forming Machinery

Other machine we manufacture

Cold roll forming mahcine, color steel roll forming machine,roof and wall panel machine,decking floor roll forming machine,floor decing forming mahcine, stud and track roll forming machine, Z and C purlin machine, highway guardrail roll forming machine,cable tray machine, and so on.

Profile drawing:

Working flow:

Decoiler-------Feeding-------Roll forming-------Cutting------Finished product

Machine components:

 Techical description:

A Manual decoiler

Inner Diameter: Φ450 – Φ600 mm
Out Diameter: 1500 mm
Max. Loading Capacity: 5000 kgs

B Roll-Forming M/C:

Material thickness:0.3-1.0mm

Feeding and effctive width depends on profile drawing
Steps:11/13 (for standard drawing)      

Roller Material: 45# steel

Diameter of active shaft: 70mm

Wall thickness of the main forming machine: 14mm steel plate

Main forming machine body : 300mmH steel

Main Motor Power:4KW

Voltage:380V/50Hz. 

Line speed:8-12m/min;

Rolling chromium thickness:0.05 mm

C Cutting device

It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.

Cutting length tolerance: ±2mm

Cutting tool material: GCr12 with quenched treatment 55-60°C

D Hydraulic System

It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.

Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.

Power of the oil pump: 3kw   

Hydraulic oil :40#

E Control system:

Type: PLC Frequency Control System with touch screen
PLC Brand: Japan Panasonic
Encoder Brand: Omron

Length Error:±1mm

Transducer: Panasonic

F Output table

It is smpile and used to load the finshed product.

Lenght:6m

Terms

Payment type: 30% T/T prepaid and balance should be paid before loading
Delivery time: 30 working days after receiving prepaid.
Guarantee period: 18monthes free service/ pay service all the machine life
Installation and training:
If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
Without visiting,we will send you user manual and video to teach you to install and operate.
If buyer needs our technician to go to your local factory,please arrange board and lodging and other necessary things.

Machine pictures:

Feeding part

Roll forming

Cutting

Finished product

We can produce machine as different profile drawing.

Contact person:Arno Hao

Skype: arno.hao

Tel: 86-21-67298619

Mobile: 86-18717894416