Click to enlarge
Mini Digital Thickness Meter
How to use:
1. Wipe up the two measuring head
2. Press the switch key, turn on the power supply, check the display is normal or not
3. Press down the measuring button to close the two measuring head, press zero key reset, loosen, then can begin to measure
4. Put down the analyte on the measuring head, then press down the measuring button, let another measuring head adpress the analyte, then take the reading
5. To display different format, press mm/in key to choose
Technique parameters:
Distinguish rate | 0.01mm/0.0005, 0.001mm/0.00005 |
Measuring range | 0-12.7 mm/.5”0-25.4mm/1” |
Electrical source | 1.5V button battery (SR44/LR44) |
Operating temperature | 0-40°C |
Storage temperature | -20-70°C |
Relative humidity (RH) | ≤80% |