Verified Company
Luoyang Yilong Refractory Co., Ltd.
Click to enlarge
Excellent impermeability fracture ceramic proppant for oil
1. Advantage of fracture ceramic proppant
fracture ceramic proppant is maily made from professional bauxite, which is much better than ordinary concrete, as it has qualities of corrosion resisting and alkali-aggregate reaction resisting.
2.Performances of fracture ceramic proppant
1,Light and low density
2,Heat retaining and good insulating
3,High refractoriness
4,Shock resistance
5,Good alkali-aggregate reaction resisting ability
6,Can increase oil production as high as 30%-50%
7,Increase life span of oil gas well
3. Application of fracture ceramic proppant
1,As oil fracturing proppant
2,As refractory material
3,Construction industry
4.Physical and chemical index
| Specification Performance | Sphericity | VolumeDensity g/cm3 | Apparent Density g/cm3 | Turbidity NTU | Difficult Solubility % | Crushing Capacity % | |||
| 52MPa | 69MPa | 86MPa | |||||||
| Low density product | 70/140 mesh | ≥0.7 | ≤1.65 | ≤2.95 | ≤90 | ≤7.0 | ≤7.0 | / | / |
| 0.212-0.106mm | |||||||||
| 40-70mesh | ≥0.7 | ≤1.65 | ≤2.95 | ≤80 | ≤7.0 | ≤7.0 | / | / | |
| 0.425-0.212mm | |||||||||
| 30-50mesh | ≥0.9 | ≤1.65 | ≤2.95 | ≤80 | ≤7.0 | ≤8.0 | / | / | |
| 0.60-0.30mm | |||||||||
| 20-40mesh | ≥0.9 | ≤1.65 | ≤2.95 | ≤80 | ≤7.0 | ≤8.0 | / | / | |
| 0.85-0.425mm | |||||||||
| Middle density product | 40-70mesh | ≥0.7 | ≤1.80 | ≤3.38 | ≤80 | ≤7.0 | ≤5.0 | ≤8.0 | / |
| 0.425-0.212mm | |||||||||
| 30-50mesh | ≥0.9 | ≤1.80 | ≤3.38 | ≤80 | ≤7.0 | ≤5.0 | ≤8.0 | / | |
| 0.60-0.30mm | |||||||||
| 20-40mesh | ≥0.9 | ≤1.80 | ≤3.38 | ≤80 | ≤5.0 | ≤5.0 | ≤8.0 | / | |
| 0.85-0.425mm | |||||||||
| 16-30mesh | ≥0.9 | ≤1.80 | ≤3.38 | ≤80 | ≤5.0 | ≤14.0 | ≤20.0 | / | |
| 1.18-0.60mm | |||||||||
| High density product | 30-50mesh | ≥0.9 | ≤1.88 | ≤3.50 | ≤80 | ≤5.0 | / | ≤5.0 | ≤9.0 |
| 0.60-0.30mm | |||||||||
| 20-40mesh | ≥0.9 | ≤1.88 | ≤3.50 | ≤80 | ≤5.0 | / | ≤5.0 | ≤9.0 | |
| 0.85-0.425mm | |||||||||
| 16-30mesh | ≥0.9 | ≤1.95 | ≤3.50 | ≤80 | ≤5.0 | / | ≤14.0 | ≤20.0 | |
| 1.18-0.60mm | |||||||||
| 12-20mesh | ≥0.9 | ≤1.95 | ≤3.50 | ≤80 | ≤5.0 | / | ≤18.0 | ≤25.0 | |