Verified Company
Qinyang City Taichang Environment Protection Equipment Engineering Co., Ltd.
Click to enlarge
3200 type used tissue paper making machine
Pulping equipment
Num | Name of equipment | Power | Qty |
1 | 5M3 hydrapulper | 55KW | 4 |
2 | 2M2high frequency vibrating screen
| 3.7KW | 4 |
3 | 14M2 round nets inspissation machinemachines
| 11KW | 2 |
4 | φ450 double grinding machine | 90KW | 3 |
5 | 1.8M2 centrifugal screen | 30KW | 1 |
6 | φ4 inch stuff pump | 5.5KW | 16 |
7 | φ6 inch stuff pump | 11KW | 9 |
8 | φ8 inch white pump | 18.5KW | 4 |
9 | φ700 pump thrusters | 11KW | 12 |
10 | High concentration the desander |
| 1 |
11 | High concentration except sand pump | 15KW | 1 |
12 | φ606 conical refiner |
| 12 |
13 | 17 type vacuum pump | 45KW | 1 |
| Total |
|
|
Note: These devices are brought within the motor.
(A), the main technical parameters:
1, producing varieties: sanitary paper
2, net paper width:3200mm
3, quantitative :110-300g / m2
4, the output : 50 tons / day
5, the design speed: 140min
6, the working speed :100-120g/min
7, gauge: 4300mm
8, Transmission: Division drive, VVVF
(B), the main structure and configuration of machine
1.Roll backφ500×3800×4300mm,1set
Roller body for seamless steel tube, 12mm thickness, surface plastic bags, glue, hardness 25mm thick 95 º± 2.
1.1 Back roller, adjustable bracket for iron type
2.Cylinder part: make up of three sets of circular nets and device
3.Press section: By two ways to pressure, two ways to principal, a squeeze of water.
4.Dryer part (make up of 14 φ1500 cylinder, spread pattern8+8+8)
5.Transmission part
This machine is ac inverter driving, the transmission point division with reducer,couplings,small gear etc. Motor, reduction machine beginning is as follows (subject to the design)
A pressure | Two pressure | Eight group cylinder | Glue blending machine | press-polishing machine
| Rewinding machine | Total power
|
45KW | 30KW | 22kw | 22kw*2 | 22kw | 11kw | 196kw |
650type | 500type | 500type | 500type | 500type | 400type |
|
If you have any question, please feel free to contact with me!