Click to enlarge
NJP-1200C AUTOMATIC CAPSULE FILLING MACHINE
| 1. Application |
| The automatic capsule filling machine adopts multi-bore dosing, intermittent motion and frequency control. It is suitable for automaticlly completing capsule feeding, seperating powder or micro pill medicine in capsule. |
| The automatic capsule machine are advanced structure, the newest closed ten position rotating table, hige precision, low noise and best suitable for domestic machine-made capsule, and soon the key parts of the bearing and eletrical equipment adopts international famous brand, performance stability and equipment adoptinternational famous brand, performance stability and can be run at a high speed. |
| All parts contacting the medicine powder are cade of quality stainless steel, provide dust collector device and made according to GMP standard. |
| 2. Main Features |
| 1. Small volume, low consumption of energy, simplification in changing modules. Easy operation and cleaning. |
| 2. Adopt fugexan eliminating Ma's trough roller to transmit, less vibration, its noise is lower than 75dB while running at the top speed. Does difference is controlled within±3%. |
| 3. The rate of capsule filling is higher than 99%. |
| 4. The turning -around parts are in full closure, having excellent lubricating cond-itions. Without old spot on the working bench, cast from under the dish through another pipe. |
| 5. Meanwhile, it can reduce the dust on the surface of the bench. |
| 6. Adopt the Man-machine interface(including PLC programming controller, crystal screen displaying the output per minute, accumulative output, dynamic empty capsule and medicine powder state, alarming for lacking of capsules and insufficient medicine powder stop, problem shooting display and so on). It has communication thermal. |
| 3. Main Technical Data | |
| Item | NJP-1200C |
| Outputs(pcs./min) | 1200 |
| No. of Segment Bores | 9 |
| Approprate for Capsule | 00#-4# |
| Total Power | 5KW |
| Overall Weight | 900KG |
| Overall Dimension(mm) | 800*1000*1800 |
| 4. Product Sketch |