Add to Favorite | Set Home | Casual look | Mobile

Advancom Electronics Technologies

Company Profile

 Advancom Electronics Technologies

Asean/Malaysia

category
  • No Category
Site Search
 
link
  • No Links
Current:Home » » » Soldering Station
Similar products
Soldering Station
Click to enlarge
Product:
Price: Negotiable 
MOQ: 1  
Total supply:
Delivery time: From the date of payment from the buyer within days of delivery
update time: 2020-01-27 01:00  Valid to:Long-term effective
  Inquiry
Profile
KEY FEATURES:
  • HEATER/SENSOR FAILURE DETECTION: If the sensor circuitfails the display reads S--E and cuts off the heater power. If theheater circuit fails the display will read H--E and will cut off theheater power.

  • TEMPERATUE LOCK-OUT FEATURE: The temperature can be locked by password code for production line management.

  • ISOLATEDIRON HOLDER WITH TIP CLEANER: Made of low abrasive brass shavingsinstead of conventional sponges to meet RoHS requirements. Cleansbetter and no water is necessary.

  • LOWVOLTAGE OUTPUT WITH SAFETY OPERATION: The power unit is isolated fromthe A.C. line by a transformer and allows 32Vac to drive the heatingelement. Solder wand runs from 32 Volts for safety and with a 80W powerceramic heater for a super-fast heat-up and quick temperature recovery.The solder wand is attached with heat resistant, non-burning, flexible5-wire cord.

  • ESD SAFE AND SPIKE FREECIRCUITRY: The Zero Voltage electronic switching design also protectsvoltage and current sensitive components (CMOS devices, etc.) againstdamaging current and transient voltage spikes commonlyproduced by lessefficient, mechanically switched stations.

  • DETACHABLEAC POWER CORD WITH PLUG: Engineered AC outlet for alternating AC powercord with plug and connector specially designed for individual CEcountries requirements.

  • EARTH JACK: With a grounding connector, For personal ESD grounding devices if required.

  • OPTIONALSMD TWEEZERS : This optional feature is especially designed for SMDchips, SOT, Flat pack ICs etc. rework. The TWZ80 Tweezer is equippedwith 32V/40W* x 2 heaters which are interchangeable with the solderingIron wand as an option. Be sure before proceeding with this operationthat main pwer switch is OFF to avoid any damage to the unit.
SPECIFICATIONS
Input PowerV.ac100-115 or 220-240 50/60 HZ
Temp Range200-480°C/392-842°F
Temp Stability±(3°C/6°F) of idle.
Dimensions4.3x6.2x5.4
Heating ElementPremium Grade Ceramic
Heat-Up Time0-300°C≤ 30 seconds.
ESD ProectionExternal Ground Port + 3 Wire Power Cord
Housing Alluminum Alloy EMI protection
Control Function Micro-Processor Control
Auto Power Down Yes
Suspend Function Yes
Temp Adjust / Lock-out/pw Yes


Inquiry list
Related Products