AK49 Key Programmer Key Programming Tool for Buick HTV

New Excelle key maker AK 49, avaliable for key with clip 48 and remote control.

Support OBD operation, has two functions keys, M1 and M2, M1: programming new keys, M2: make remote control function (can repair New Excelle which is damaged by T300)

1. match key chip. Hit “M1” to choose how many keys you want to make ( minimum 2, maximum 5 ). For exsample, if you want to make 3 keys, ignition with the first key. Choose”3” with “M1” and keep pressing for 3 seconds, then release, “H3” would flash fast. When “H3” turn to ”H2” and stop flashing, draw out the fist key and insert the second key to ignition, press “M1”, then ”H2” would flash; when “H2” turn to “H1” and stop Flashing, draw out the key and insert the third key to ignition, press “H1”, “H1” flash, ignition off. At last, continuing operations below with the third key: on-off-on-off-on-off, ( should be 2 SECs pause after each on or off ), draw out key after 2 SECs, finish key making. ( for successful key making only brand new chip 48 are avaliable.)

2. match remote control. minimum 1, maximum 4. press “M2” to chosse how many controls you need to make.eg: you need to make 2 controllers, Choose”A2” with “M2” and keep pressing “M2” for 3 seconds, “A2” would flash fast after release. AK 49 will “Bi” after 30 SECs to alert you to press the first remote control ( press “on” and “off” of contol together for 1 SEC, release for 1 SEC; continuously hit and release “on” and “off” 3 times, then press “on” and release after 1 SEC ) and will display “A1” and flash. The second control could be made following the same operation above. Remote control making are finished after AK 49 stop flashing.