Daihatsu 4D Key Maker by OBD--key programmer--car tool-- ecutool

Daihatsu 4D Key Maker by OBD

The instruction of Daihatsu 4D Keymaker OBD

1. connect the programmer to the OBD port of the car

2. Insert the original key into the ignition lock,  turn to "ON" position ,then remove this key after the theftproof light off

3. Third, insert the new key into the ignition lock, then turn to "ON" position, the new key will successful when the theftproof light off.

4. Now can remove the programmer from the OBD port.

Remark:  It DOES NOT support key lost at present.