Usage of RTV Liquid silicone rubber for sculpture mold

RTV Liquid silicone rubber for sculpture mold is intended for making silicone rubber mold for resin crafts, candles, plastic toys, relieve furniture, architectual decoration, furniture decoration, sculpture and so on.
Feature of RTV Liquid silicone rubber for sculpture mold

RTV Liquid silicone rubber for sculpture mold is flowing liquid with general hardness of 22-50 A ° After curing with features:
1)low shrinkage 2)good operation 3)high tear and tensile strength 4)curing agent free 5)easy de-mold 6)high reproduction times 7)resistance to deformation and high-temperature, acid-alkali

Operations of RTV Liquid silicone rubber for sculpture mold

If customers want to make large products and large size moulds, the mould should be made of silicone rubber with high hardness. On the contrary, if the mould with fine and precision patterns, it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If mould requiring fast drying and demould, more curing is needed.

Storage and Precautions of RTV-2 mold making silicone:

RTV-2 mold making silicone, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.

FOQ of RTV-2 Silicone Rubber for Mold Making

Why does the RTV liquid silicone rubber for molding have few mold making times?

The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.

Should you have any question or need more information, please feel free to contact Nicole:

Web:www(dot)mcsilicone(dot)com

E-mail:nicole(at)mcsilicone(dot)com

Skype:nicoleszmc

MSN: nicoleszmc (at)hotmail(dot)com