Verified Company
Dongguan Mingcheng Electronic Technology Limited
Click to enlarge
Specifications of RTV2 Silicone Rubber for Skin Casting
1. Platinum (PT) cure, good resilience
2. Non-toxicity, human skin color
3. Good tear strength and elongation
Applications of RTV2 Silicone Rubber for Skin Casting
RTV2 Silicone Rubber for Skin Casting is suitable for human skin model made, Life casting, Masters, Prototypes, Decorative Component, Architectural Models, etc.
Datasheet of RTV2 Silicone Rubber for Skin Casting
| Item No. | SK5 | SK0 |
| Color | liquid white | liquid white |
| Curing agent | CA30 | CA30 |
| Mixing ratio | 100:2 | 100:2 |
| Mixed viscosity | 9000-25000 cps | 4500-6000 cps |
| Pot life | 8-10 Minutes | 0-1 Minutes |
| Curing time | 4-6 Hours | 4-6 Hours |
| Hardness | 5-10 Shore A | 0-1 Shore A |
| Tear Strength | 20 N/mm | 20 N/mm |
| Tensile Strength | 2.5 MPA | ≥2.5Mpa |
| Shrinkage | 0.3% | 0.3% |
| Elongation at break | 650% | 750% |
| Methods of molding | Pouring | Pouring |
Note: You can add the pigment to adjust the color of the silicone appearance.
Instructions for Making Silicone Rubber Molds
1. Make sure the surface of the original is clean and free of loose material.
2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.
3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage.
4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base.
5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original
6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold.
Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Storage of RTV2 Silicone Rubber for Skin Casting
When the RTV2 silicone rubber is stored at or below 30 °C (85°F) in the original unopened containers, RTV SK0/SK5 silicone base and CA30 curing agent have a usable life of 9 months from the date of production.
The information above is just for reference, if you're interested or have any questions, please feel free to contact Nicole:
Web:www(dot)mcsilicone(dot)com
E-mail:nicole(at)mcsilicone(dot)com
Skype:nicoleszmc
MSN: nicoleszmc (at)hotmail(dot)com