Introduction of Plaster Cornice Molding Liquid Silicon 

Liquid Silicon is a two-component material, this kind of silicon consists of Part A base silicon and Part B CA30 curing agent, and Part A base silicon and Part B curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicon molds: plaster polyurethane, PU, GRC, cement, resin, polyester, wax etc...

Specifications of MC Liquid Silicon

Equipped with REACH certificate 

Professional technician with rich experience 

4% catalyst is offered for free of charge  

Silicone range:10-60 shore A  

High duplicating silicone molds(500-600)

Features of Plaster Cornice Molding Liquid Silicon 

1. Good flow ability and long working time

2. Medium hardness

3. High tear and tensile strength

4. Easy de-mould from complex replica parts

5. Acid and alkali-resistance

6. Low linear shrinkage

Applications of  Liquid Silicon

Liquid silicon can be applied in many objects mold making, since the liquid silicon has good flow ability and medium hardness, and the silicon can cure at room temperature, thus it's a good material for duplication.

Liquid Silicon can be used for artificial stone moldmaking.For example RTV2030,RTV2066 and RTV2088 silicon .

Liquid silicon can be appliied in candle and soap moldmaking, such as RTV215 and RTV218 silicon .

Liquid silicon can be used for plaster moldmaking, such as RTV2025,RTV2028 and RTV2030 silicon .

Liquid silicon can be applied in the field of shoe sole moldmaking, for example, RTV3010 and RTV3015 silicon .

Liquid silicon can be used for prototyping and electronic potting.

Liquid Silicon for Plaster Cornice Molding is also suitable for the reproduction of cement molding, concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds. Etc.

Technical datasheet of Plaster Cornice Molding Liquid Silicon

Base and Curing Agent Mixture (100:2 by weight) in 25 °C (77F) testing