Click to enlarge
HK-1002A Semi automatic closed-cup Flash Point Tester
(Pensky-Martins method)
Overview
HK-1002A Semi automatic closed-cup flash point tester for petroleum products (Pensky-Martins method) conforms to the ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8 mm 2/s (cSt) or more at 37.8°C or 9.5 mm 2/s (cSt) or more at 25°C (77°F), or that contain suspended solids, or have a tendency to form a surface film while under test. Other classification flash points have been established by these departments for liquids using these test methods.
Features
- The upper cover is equipped with a standard fireball comparer, easy to operate.
- Heating with stepless voltage regulator, heating-rate equability.
- Stainless steel heater, safe and reliable.
- Electrical motor to agitate oil sample makes the temperature of oil sample up equability.
- Remote control to light fire could improve the testing accuracy.
- Rational design with attractive appearance and easy operation.
Technical parameters
1. Rated voltage: | AC220V±10% 50Hz |
2. Temperature range: | 40~300°C |
3. Heating power: | 0~1000W (Continuously adjustable) |
4. Agitation way: | Motor stirrer, 105r/min |
5. Ignition gas: | Pipeline coal gas, Liquid gas, and gas pressure less than 10Kpa |
6. Ignition way: | Remote control ignition |
7. Ambient requirement: | Temperature: 20~30°C, Humidity≤85%. |