Cylindrical Leverset

Specifications

Installation
2 1/8" (54mm) diameter cross bore
1" (25mm) diameter edge bore

Rose Diameter
2 5/8" (67mm)

Cylinders
5-pin tumbler cylinder, brass plug, assembly with 2 brass nickel-plated brass keys

Exterior Roses
Either Wrought Stainless Steel or Brass

Door thickness
Lever assembilies provide automatic adjustment to door thickness from 1 3/8" (35mm) to 1 3/4" (45mm). Can be furnished for doors over 1 3/4" (45mm) when so ordered. When ordering for doors over 1 3/4" (45mm), specify exact thickness of the door.

Latches
Supplied with latches either to fit 2 3/8" (60mm) or to 2 3/4" (70mm) backset.Standard latchface is 2 1/4"x1" (57x25mm) square cornered.Radius faceplate available when specified.

Packing
One set per box with screws and instructions for installation. Blister packing available when specified.

Handing
…… are non-handed.
Handing- right handed ( hinges on right, as viewed from the exterior side of the door.) Handing- Left handed ( hinges on left, as viewed from the exterior side of the door.)