Click to enlarge
Mechanical welded mesh machine made in China
DP-MW-1200A
1. This machine adopts electrical & electronic synchronous control technique, both welding time and separate-phase welding is composed of digital and integrated electric circuit.
2. The operation is accurate, it has stable function, firm welded point, and without welded tracks.
3. The longitude and cross wires are fed from coils.
4. The machine is equipped with precise equipment for weft cutting and positioning, so the length of wefts is identical and regular, it is unnecessary to slice the side.
5. Mesh pulling system adopts elastic tension link and opening positioning mesh, it is easy to regulate mesh hole, and mesh opening size is rather accurate, welding aperture could adjust randomly within range.
6. Not only welding speed is fast, it is easy to learn and operate. Only need one worker.
7. The finished products can be in coil or in panel.
Type | Wire Diamete | Longitude Wire Space | Cross Wire Space | Width of Mesh | Welding Electrodes | Welding Speed | Rated Electrical Power |
DP-MW-1200A | 1.4-2.5mm | 50-200mm | 25-200mm | 1200mm | 25pcs | 60times/min | 56kva*3pcs |
Mechanical welded mesh machine made in China
DP-MW-1200B
1. This machine adopts electrical & electronic synchronous control technique, both welding time and separate-phase welding is composed of digital and integrated electric circuit.
2. The operation is accurate, it has stable function, firm welded point, and without welded tracks.
3. The cross wires are need to be pre-straightened and pre-cut, then put into the cross wire hopper. Step motor in the hopper controls fetching the cross wire and feeding the cross wires into welding automatically, so it is accurate. The longitude wires are feeding from coils.
4. The edge of mesh is regular and it is unnecessary to slice the mesh edge.
5. Mesh pulling system adopts elastic tension link and opening positioning mesh, it is easy to regulate mesh hole, and mesh opening size is rather accurate, welding aperture could adjust randomly within range.
6. Not only welding speed is fast, it is easy to learn and operate. Only two workers finish the operation.
Type | Wire Diamete | Longitude Wire Space | Cross Wire Space | Width of Mesh | Welding Electrodes | Welding Speed | Rated Electrical Power |
DP-MW-1200B | 2.5-3.5mm | 50-200mm | 25-200mm | 1200mm | 25pcs | 45times/min | 85kva*3pcs |
Mechanical welded mesh machine made in China
DP-MW-1200C
1. This machine adopts electrical & electronic synchronous control technique, both welding time and separate-phase welding is composed of digital and integrated electric circuit.
2. The operation is accurate, it has stable function, firm welded point, and without welded tracks.
3. The cross wires are need to be pre-straightened and pre-cut, then put into the cross wire hopper. Step motor in the hopper controls fetching the cross wire and feeding the cross wires into welding automatically, so it is accurate. The longitude wires are feeding from coils.
4. The edge of mesh is regular and it is unnecessary to slice the mesh edge.
5. Mesh pulling system adopts elastic tension link and opening positioning mesh, it is easy to regulate mesh hole, and mesh opening size is rather accurate, welding aperture could adjust randomly within range.
6. Not only welding speed is fast, it is easy to learn and operate. Only two workers finish the operation.
7. The finished products can be in coil or in panel.
Type | Wire Diamete | Longitude Wire Space | Cross Wire Space | Width of Mesh | Welding Electrodes | Welding Speed | Rated Electrical Power |
DP-MW-1200A | 3-5mm | 50-200mm | 50-200mm | 2500mm | 48pcs | 45times/min | 100kva*3pcs |