Steel Wire Straightening And Cutting Machine
Introduction :
The wire cutting and straightening machine used to straightening wire or rebar, and then cut it into the needed length. It can do a prepare work for the wire mesh welding machine.
Features:
1. It applies to a series of different kinds of steel bars
2. highly automatic, work constantly, very safe.
3. easy to operate, easy to adjust , high efficiency.
4. It can finish around 1000pcs/hour
5. Fast in straightening and cutting: Speed 110/m
6.Accurate measurement:≤±1mm
7.low failure rate: work with high performance for a long time under normal condition after debugging
8.Precise straightening : the straightness of straightening wire is ≤±1mm
9.Arrangement of the wire : Min 1mm, Max. 16mm
Main parameter:
Model | Wire dia.(mm) | Cutting length | Speed (m/min) | Power | Weight | Dimension (mm) |
CT0.3-1 | φ0.3-1 | 300-600 | 54-108 | 1.1KW | 100Kg | 1000*500*700 |
CT1.6-6 | φ2-6 | 600-6000 | 110 | 2.4KW | 1000Kg | 7750*600*1260 |
CT3-8 | φ3-8 | 100-6000 | 40 | 5.5KW | 700Kg | 7250*550*1150 |
CT5-12 | φ5-12 | 2000-12000 | 40-60 | 12.1KW | 1500Kg | 13770*535*1457 |
CT4-14 | φ4-14 | 800-12000 | 40 | 11.5KW | 1450Kg | 1430*700*900 |
CT5-12 | φ5-12 | 1000-12000 | 120 | 30KW | 5000Kg | 18000*5000*2000 |
CT6-14 | φ6-16 | 3000-12000 | 120 | 24KW | 3500Kg | 14000*500*1260 |

Verified Company

