Request for raw materials:
1. In order to ensure the good quality and mechanical strength of the final product, special care should be taken to ensure that the granule size fed to the machine is maintained below 3mm, preferable in the range of40% small than 1mm, with no more than 10% over 2mm.
2. The moisture content of the mixture has also a critical effect on the quality of the final product, so it should be kept in the range of 8-20%.

Major role and characteristics:
The machine can press all kinds of mineral powder, metal powder, coal powder, coke powder and other materials to make them molded. Because of the mandatory squeeze roller, so the products have the three high characteristics: high density, high strength, high hardness. Because of the mandatory squeeze rollers, so the products have high density, high strength, high hardness, and the local roll is used in 65Mn hard materials with good wear resistance.

Working principle of briquette machine
This series of pressure machine will pass the power on to the two pressure roller through the reducer. The two sides and roll rotation, in both the rotating roll, Natural materials to enter the briquette roll mode, with the roll rotation, material pressure on a small become larger, when the material to the two rollers rotating line contact point, the pressure of materials has reached the peak. Tremendous pressure in the role of line, the materials become a finished product from the powder briquette.

Our professional service:
According to the character of customer's material, the different demand of capability, the different shape and size of final product, we specialize in supplying you the fittest device. Sending the professional technical personnel to install.