HW-LG-1 HW-LG-2HW-LGZ-1HW-LGZ-2 Main FeatureLED chip cree/ taiwanShell Materialalloypackagecolor boxPacking article/ settwo logo lights one hole saw and one manualPacking:installation guide:1. Open the door, remove the plastic door panels with the tool.2. Make sure the position for installing, It can be installed on the coaming and chassis or other right position. Choose the fit postiton to drill a hole, the size of hole should be same as the lens oflogolight.Fixed the stand of the projection light on the car with a screwdriver.3. Adjust the lamp holder to the best position. Tighten the fixed-screw at the bottom of the light cup.4. Connect the power cord and remote control according to the installation guide.Check the light work normaly or not.if the light can`t work, please check the wire is connected wrong or not.