Click for original picture
Brand:YYH
Description:LED modules, led 12V modules, power ledmodule, waterproof led module, constant current circuitm, ultrasonic welding circuit
Origin:China Guangdong
MOQ:5000 piecesSets
FOB:per0.41USD--0.45USDUSD
Port:Shenzhen Shekou
Payment Terms:T/T
Supply Time:Week
Product detail:
Features
Ø Stylish appearance design with cap type
Ø Take high efficiency SMD Chip as light source application
Ø LED Chip applied by famous brands, Cree, Samsung, Epistar etc
Ø High brightness,large emitting angle ,low thermal resistance
Ø Low light decay and high uniformity of the emitting color
Ø Fabricated with a CAP TYPE Optical Lens
Ø With pure copper wire for a low thermal resistance
Ø Each unit can be used to cut
Ø Safety, energy saving and Eco-friendly
Ø UL/CE and RoHs approved
Typical Applications
Ø
Channel letters
Ø Advertising letters
Ø Decorative lighting
Ø Sign and signage and light box illumination
Ø Replaces neon/fluorescent lighting
Product parameters
|
LED chip brand |
Cree / Samsung / Epistar |
|
Chip size |
5054 |
|
Operating voltage |
DC 12V / 24V |
|
Power dissipation |
0.75W |
|
Emitting angle |
160° |
|
Luminous intensity |
105lm（typ.） |
|
Dimension |
63*15*8.5 mm （L x W x H） |
|
LED quantity |
3 pcs |
|
Emitting color |
Red |
|
Waterproofing rate |
IP67 |
|
IP type |
Injection workmanship |
|
Material of main cabinet |
ABS , fireproof and inflame retarding |
|
Material of Lens |
Optical Lens, fireproof and inflame retarding |
|
Color of main Cabinet |
White |
|
Material of connecting cable |
UL20 AWG， 300V/80°C |
|
Color of connecting cable |
Positive: red; negative: white |
|
Max. In series |
Based on Power Voltage Supply |
|
Adhesive type |
3M adhesive Sponge |
|
Operating temperature |
-30~85℃ |
|
Storage temperature |
-40~100℃ |
|
Warranty |
5 years |
Product applicationnotes
Ø
Don`t stick the surface of the light by sharp tools.
Ø Don`t fix this product by sour glassglue or other soured adhesion;don`t operate or store this product in sourenvironment or the light will be vulcanized and the life span of the productwill be reduced.
Ø Drive this product by 12V DC switchpower supply, and the power should be suitable for the quantity of the ledmodules; do not connect this product to the utility directly, or the productwill be burnt up.
Ø The total power of the led modules inseries should be lower than 80% of the power of the driver, or the power supplywill be burnt up probably,selec the suitable thickness of the connecting cablein terms of the quantity of modules, and the connecting points should bewrapped by electrical tape.
Ø The maximum cascade quantity ofDC12/24V product are 50 pieces in a series(the Power Voltage Supply type of 36VDC and above can be higherquantity in series ), and the brightness of the two ends will be differentbecause of the vol
